Welcome to AROS!

-------

In order to setup networking, use Network application visible on desktop.

Click "Add" and select the device matching your hardware. Some examples:
- for default VirtualBox configuration use pcnet32.device.
- for default VMware configuration use e1000.device.
- for Realtek Gigabit cards use rtl8169.device.

Click "Use" to start network

Once network is started, you can use Odyssey Web Browser. Nagivate to
Tools/OWB and start it. Note that it will take some time to scan fonts before
browser is launched. This will be a one-time operation when AROS is installed
to disk. Make sure you have a minimum of 2GB RAM when running browser.

-------

In order to install AROS to disk, use the InstallAROS icon on desktop.

Assuming you have an IDE or SATA disk connected it will be automatically
selected by InstallAROS. It is best to install AROS on dedicated hardware with
dedicated disk to avoid risk of selecting your Windows/Linux disk by mistake.

Assuming your disk has no prior AROS partitions follow step 1). It there
are already AROS partitions on disk, go to step 2)

1) Click "Proceed", Select "Wipe disk", Click "Proceed", Click "Proceed".
   AROS will reboot.
2) Click "Proceed". Validate that "Use existing AROS partitions" is selected.
   Click "Proceed". Click "Proceed". Click "Proceed". Click "Proceed".
   Click "Proceed". Installation process will start. When it completes, click
   "Proceed" to finish installation.

-------

Useful links:

AROS Community forums: https://arosworld.org/
AROS Software repository: https://archives.arosworld.org/
Tutorials: https://arosnews.github.io/tutorials/
Hardware: https://en.wikibooks.org/wiki/Aros/Platforms/x86_Complete_System_HCL#Recommended_hardware_(64-bit)


